EasyManua.ls Logo

Denver DAB-20 - FM Radio Operations; FM Manual Tuning and Settings; Preset Stations and Recall

Denver DAB-20
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Manual Tune
To fine tune the frequency manually, use the ◄/► button. The frequency will be
tuned up or down by 0.05MHz.
FM Settings
Following options are available: Press <Menu> button to enter the list.
Scan setting
Audio setting
System
Scan setting
There are two types of scan available. The scan is done according to “Strong
station only” or “All station. If ‘strong station only is selected, it will scan only
the channels with strong reception signal where the radio is placed. If “All
station” is selected, it will scan out both the strong and weak channels.
Audio setting
You can press ◄ or ► to find “Stereo allowed” or “Forced mono, then press
<Select> to conrm.
System
Please refer to the System setting under DAB section.
ENG-7
Preset stations
The Preset stores favorite stations for easy access. It presets up to 10 DAB radio
stations and 10 FM stations in the radio memory.
1. The preset stores favorite stations for easy access. It presets up to 10 DAB
radio stations.
2. To preset a station, hold and press a specic number (from 1-10) until the
Preset X Saved” message appears.
3. The station is now successfully saved against the selected preset number.
You will see the icon at the bottom of display which shows the corresponding
number of preset.
Preset Recall
1. To recall the preset list, press the <Recall> button and it will display the list of
the presets you have saved.
2. Alternatively, you can press a specic number to recall a specic radio station.

Related product manuals