Denver DAB-38 - Setting and Managing Alarms; Alarm Setup Wizard; Alarm Configuration Options; Saving Alarm Settings

USING THE ALARMS
SETTING THE ALARMS
You can set two completely separate alarm times (ALARM
1 and ALARM 2) and activate either or both of them to
wake you with radio or a buzzer. You can also pre-set the
station preset and volume settings that the alarms will
wake you with.
Setting the alarm times:
Switch on the radio (Alarm settings cannot be changed •
when set to Standby).
Press the • Alarm button once to set Alarm 1 or twice
to set Alarm 2.
In the examples to follow, Alarm 1 is to be set.
‘Alarm 1 Setup’ will appear on the display.
Press the •
Alarm 1.
Select/Station control if you want to set
‘Alarm 1 Wizard’ will appear on the display.
The alarm is now set in the sequence shown in the next
column.
NOTE: Press the Alarm button at any time to exit alarm
setting, leaving the settings unchanged.
To make a change to a setting:
Turn the Select/Station control to step through the
options available for a setting (or times when clock
setting).
• When you have nished changing a setting, press the
Sele
ct/Station control to confrim the setting and move
on to the next setting in the sequence.
Repeat the previous two steps to change each setting
as required.
•
*NOTE:- When changing the Alarm radio preset setting,
choose the Last listened’ option to wake to the last station
you played before setting the radio to Standby.
Saving alarm settings:
Your alarm settings are automatically saved when you complete the last setting and press theSelect/Station
control.
The display will conrm with the words ‘Alarm saved’.
Alarm repeat:
The alarm(s) will repeat according to the Alarm Repeat setting you made when setting the alarm.
setting you made when setting the alarm.
ALARM SETTING SEQUENCE
Alarm 1 Time
Set the alarm hours, then minutes
Alarm 1 Duration
Set the duration of the alarm
Alarm 1 wake-up mode (Source)
Choose from DAB,FM, Buzzer
Alarm 1 preset*
Choose a preset for radio alarm modes
Alarm 1 Repeat
Set the alarm
Daily, Once, Weekends or Weekdays
Alarm 1 Date
Option appears if Repeat is set ‘Once’
Alarm 1 Volume
Set the volume for Alarm 1
Alarm Saved
The alarm settings have been saved
Alarm 1 On/O
Choose to set Alarm 1 On or o
ENG-8