Denver DMP-389 - Page 5

To Use
NOTICE: Do not use discs that have been scratched or damaged in this
product, as they may cause the product to skip or stop.
Basic Operation:
1. Open the Unit Door by pushing the Door Button.
2. Place the CD Disc or MP3 Disc, label side up, onto the %
spindle until it snaps into place, and then close the
Unit Door.
w . Connect the Headphones to the Headphones Jack in the side of the unit.
4. To turn the unit on and begin playback from the first track, press the
Play/Pause Button.
5. Once the CD Disc / MP3 Disc is playing, the Electronics Anti-Shock
Protection will be automatically turn on. The “ESP” will be flash & show
on the LCD Display.
6. Adjust the volume by turning the Volume Dial.
WARNING: Avoid prolonged exposure to high sound levels, as this may
cause permanent hearing damage.
7. Use the other controls as follows:
BUTTON FUNCTION(S)
e Press to start playback.
Play Rause * Press to pause playback and again to resume playback.
+ Press once to restart the current track.
A * Press once or repeatedly to skip to a previous track.
ies Previous: |, Press and hold to scan backward through the current
track.
« Press once or repeatedly to skip forward to a track.
bmi Next * Press and hold to scan forward through the current
track.
* Press once to stop playback or twice to turn the unit
Stop/Power Off off
8. To turn the unit off, press the Stop/Power Off Button twice during
playback or once while the CD is stopped.