cable with two pins from on unit to TV audio input port, then connect the video cable with
three pins from on unit to TV Ypbpr input port( connect as per the corresponding color ),
select the TV mode as Ypbpr, then you can watch the video with high definition.
If select the TV mode between CVBS PAL ,CVBS NTSC, please connect to TV as per below
method:
Open the video file, under status bars, click switch to TV screen display, connect the audio
cable with two pins from port to the audio input port on TV, then connect the Green signal
cable of cables with three pins from port to TV video input port, select the TV input mode
as video output, then you can watch the video files in player.
Use TF card
Insert TF card
Insert TF card to the player, when pop up, press again, it will exit.
Read files in TF card
Under insert TF card, select Explorer under main menu to enter and select TF card, click to enter
to read files.
Note: When reading TF card, please don’t pull out or insert optionally. Take out the card after the
To Next Page
Loading...
