15
Electric scooter with disc brake will require adjustment over time and in the end will need
to be replaced, when worm down. Avoid using electric scooter when brakes are worn
down, as this is unsafe and will also damage the brake system.
Wheels:
Check the wheels for wear at regular intervals to avoid unsafe riding.
If the wheel seems wobbly even after screws are tightened, the bearings might
be worn down and need replacement.
● Please make sure to check that the steering system is correctly adjusted and that all
connection components are firmly secured and not broken before riding, refer to
handle assembly and safety instruction.
● Please read operation guide and warnings of correct techniques for use and braking
● Always wear shoes.
● We highly recommend to always wear helmet/pads for your own protection.
● Self-locking nuts and other self- locking fixings may lose their effectiveness.
● All parts and materials of electric scooter cannot be changed, modifications of the
scooter are not allowed. If done, then warranty is void.
Storage and cleaning
If your Electric scooter gets dirty, please clean it with a damp cloth only, you may not use
pressured water‐gun or running water, as this could damage vital parts. It is also possible
to use a little toothpaste if the dirt is stuck. Remember to clean with damp cloth after
this.
Please make sure to keep the electric scooter turned off while cleaning it, and make sure
to cover the charging input to avoid problems with the electronics.
Make sure to dry the scooter with a towel, should it become wet.
Please notice: Do not use alcohol, gas, kerosene or other corrosive and volatile chemical
solvents. This can damage both the appearance and the internal structure of the electric
scooter.
Please store your Electric scooter in a dry and cool environment when not in use. Avoid
leaving it outdoors, as it is not made for storing in wet areas. Nor is it good to expose to
high temperatures caused by direct sun for a long time.
To Next Page