EasyManua.ls Logo

Denver SEL-90100F - Page 28

Denver SEL-90100F
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
WARNINGS
Please read the manual completely and the instructions below before using the product.
Product names: SEL-90100F
Product type: Electric scooter
Year of manufacturing: 2022
• Note: ONLY use the supplied charger labelled HLT-180I-5462000 with the following
output voltage to charge this Electric scooter: 54.6V – 2A.
• Using another charger may damage the product or create other potential risks.
• Never charge the product without supervision.
• The charging period of the product should not exceed 8 hours. Stop charging after 8
hours.
• The product should only be charged in temperatures between 0°C and 45°C.
• If charging at lower or higher temperatures, there is a risk that the performance of the
battery will be reduced and a potential risk of damage to the product and personal injury.
• The product should only be used in temperatures between -10°C and +45°C.
• If used at lower or higher temperatures, there is a risk that the performance of the
battery will be reduced and a potential risk of damage to the product and personal injury
• Store the product at temperatures between 0°C and 35°C. (optimum storage
temperature is 25°C)
• Charge and store the product in an open, dry area and away from flammable materials
(i.e. materials that may burst into flames).
• Do not charge in sunlight or near open fire.
• Do not charge the product immediately after use. Let the product cool down for one hour
before charging.
• If the product is left with other persons for example during a holiday period, it should be
partially charged (20-50% charged). Not fully charged.
• When shipped from the factory, the product has often been partially charged. Keep the
product in a partially charged state, until it is going to be used.
DENVER A/S
Omega 5A, Soeften, DK-8382 Hinnerup, Denmark
www.denver.eu