2. When the CD DOOR is closed with a CD inside, the total number of tracks
of the disc will be shown on the CD LED DISPLAY and will go to “STOP”
mode.
3. If the CD DOOR is not closed or there is no disc inside, the DISPLAY will
show “ 0 0 ” and go to “STOP” mode.
PLAY/PAUSE MODE
1. When the PLAY/PAUSE BUTTON is pressed during “STOP” mode, the first
track will be played. The PLAY/PAUSE LED INDICATOR will be lighted. The
CD LED DISPLAY will show the specific number of tracks played.
2. For interruption while the CD is playing, press the CD PLAY/PAUSE
BUTTON once. The PLAY/PAUSE LED INDICATOR will flash continuously.
3. Though the sound stops, the disc will continue to spin. To re-start playing,
press the CD PLAY/PAUSE BUTTON once again. The music will start from
the exact position where it was interrupted.
4. To stop the CD, press the CD STOP BUTTON once whether the CD is in
Play or Pause mode.
REPEAT MODE
1. REPEAT 1:
When the REPEAT BUTTON is pressed once, the REPEAT LED INDICATOR
will light and flash continuously. This single track of music will be
repeated.
2. REPEAT ALL:
When the REPEAT BUTTON is pressed twice, the REPEAT LED INDICATOR
will stay lit. The whole disc can be played continuously.
3. TO CANCEL THE REPEAT FUNCTION
Press the REPEAT BUTTON until the lighted REPEAT LED INDICATOR is
turned off .
SKIP AND SEARCH MODE
1. During play or pause mode, when CD SKIP FORWARD “>>” or CD SKIP
BACKWARD “<<” Button is pressed once, it will go to the next track or go
back to the beginning of the track.
2. During play mode, when CD SKIP FORWARD “>>” or CD SKIP BACKWARD
“<<” BUTTON is pressed and held, it will search the track with audible
high speed forward or backward playback.
Program Mode
1. During the CD STOP mode, press the PROGRAM BUTTON once. The
English - 5
To Next Page
Loading...
