1. Press and hold SET / ALM SET for 2 seconds, the time digits change to “2008 YR” and start
flashing. Press ▲/▼ to set the year.
2. Press SET / ALM SET again, the month digits start flashing. Press ▲/▼ to set the month.
3. Press SET / ALM SET again, the date digits start flashing. Press ▲/▼ to set the date.
4. Press SET / ALM SET again, the time digits change to “24 Hr”, press ▲/▼ to select “12 Hr”
time format or “24 Hr” time format. When selecting “12 Hr”, the AM / PM icon will be displayed.
5. Press SET / ALM SET again, the time digits change to “00”, press ▲/▼ to select your time
zone.
6. Press SET / ALM SET again, the time digits “0:00” show and the hour digits start flashing.
Press ▲/▼ to set the hours.
7. Press SET / ALM SET again, the minute digits start flashing. Press ▲/▼ button to set the
minutes.
8. Press SET / ALM SET to return to normal mode, or wait 30 seconds for the unit to return
automatically.
SET ALARM
Press SET / ALM SET, the time digits change to the alarm time digits “AM 7:00 AL”. Press and hold
SET / ALM SET for 2 seconds, the hour digits start flashing. Press ▲/▼ to set your desired alarm time
hour.
Press SET / ALM SET again, the alarm minute digits start flashing. Press ▲/▼ to set the alarm
minutes.
Press SET / ALM SET again, time digits change to “05” and start flashing. Press ▲/▼ to set the
snooze duration between 1 and 20 minutes.
Press SET / ALM SET to return to normal mode, or wait 30 seconds for the unit to return
automatically.
TURN ALARM ON OR OFF
Press SET / ALM SET to display the alarm time. When the alarm time is displayed, press ▲ to turn
on / off the daily alarm. When the alarm function is turned on, the
icon appears between the hour
and minute digits.
SNOOZE FUNCTION
When your alarm turns on, the clock sounds a beep to wake you up. The
icon starts flashing.
1) Press SNOOZE to stop the alarm temporarily, the
icon keeps flashing. The alarm will beep
again after 5 minutes.
To Next Page
Loading...