EasyManua.ls Logo

Denyo DLW-300LS - Safety Precautions; General Hazard Warnings

Denyo DLW-300LS
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 2 -
󲷐󲷍󲷲󲷠󲷥󲷤󲷳󲷸 󲷯󲷱󲷤󲷢󲷠󲷴󲷳󲷨󲷮󲷭󲷲
The symbols shown below are used throughout this manual to call attention to and
identify possible hazards. When you see the symbol, watch out, and follow the
related instructions to avoid the hazard. Read and follow all Safety Standards.
Only qualified persons should install, operate, maintain, and repair this machine.
During operation, keep everybody, especially children, away.
DANGER :
ELECTRIC SHOCK CAN KILL.
Do not touch output
terminals
DANGER :
DIESEL FUEL CAN CAUSE FIRE
OR EXPLOSION.
during operation. This is extremely
dangerous when your hands are wet.
Stop the machine before you touch the
terminals for connection and other
purposes.
Fuel and oil are inflammable. Never fail
to keep in flammable material away from
the machine, never smoke while refueling
and never refuel during operation.
DANGER :
ENGINE
EXHAUST GASES CAN
KILL
CAUTION :
HOT PARTS CAN CAUSE SEVERE
BURNS.
Exhaust from the engine contains
substances harmful to the human body.
Sufficient change of air is necessary
when the machine is used in places
with poor ventilation, such as in a
tunnel or indoors. Do not direct exhaust
to passers-by or houses.
Do not touch, while operating the unit,
the engine cooling fan and other places
of high temperature like the exhaust
pipe, engine and radiator.
Even when the machine is stopped, take
care that the machine has cooled down
enough before touching the engine and
the like.
DANGER : NO CONNECTION TO HOUSE
WIRING
Connecting to house wiring is very
dangerous because it may cause electric
shocks and damage the machine.
CAUTION :
Do not touch moving parts
inside the machine. Stop the
engine when you do
maintenance.
DANGER : CONFIRM CONNECTION
Damaged cables and insufficient
tightening of connection screws may
cause damage to the machine and
electric shocks. Repair damaged
cables and ensure connections are tight.

Related product manuals