Depa DH50-FA - Page 7

7
DEPA
®
Air Operated Diaphragm Pumps
EC declaration of conformity
In accordance with EC regulation No. 1935/2004 on materials and articles intended to come into con-
tact with food, as well as EU regulation No. 10/2011 on plastic materials and articles intended to come
into contact with food.
The manufacturer Crane Process Flow Technologies GmbH,
Heerdter Lohweg 63-71,
40549 Düsseldorf, www.depapumps.com
declares that the pump units manufactured in series production
Designation: DEPA – Air Operated Diaphragm Pumps and DEPA Pulsation Damp-
eners
Types: DL..SLV,DL..SUV,DL..UEV,DL..SF/SFS,DH..UEV
PD..SL, PD..SU, PD..UE, PH..UE
Sizes: 15, 25, 40, 50, 80
Casing material: Stainless steel: 316L/1.4404, 304/1.4301
Diaphragm materials: PTFE, PTFE compound, EPDM grey
Valve ball materials: PTFE, stainless steel: 316L/1.4404, EPDM grey
Valve seats: PTFE, stainless steel: 316L/1.4404, 304/1.4301, EPDM grey
O-rings: FKM/FEP coated
in the design delivered by us, are in compliance with the following applicable regulations:
EU Regulations: VO 2023/2006 und VO 10/2011 and Reg. 1935/2004
and, in addition, are free from bisphenol-A and phthalates, FCM substance Nos. 151 and 283.
Harmonised standards: DIN EN 1672-2:2009
Other applied standards FDA21 CFR 177.2600 (Rubber Articles)
and international directives:  FDA21CFR177.1550(PeruorocarbonResins)
BfR Recommendation XXI (Category 3 for rubber material,
category 2 for plastics)
The plastic and elastomer articles or objects listed here are suitable for multiple contact with all food categories.
Themaximumpermittedoperatingtemperaturesoftherespectivematerialsaccordingtotheoperatinginstruc-
tionsmustnotbeexceeded.
Mr. Ralf Rennwanz is authorised to compile the technical documents.
Place, date: Düsseldorf, 24/08/2016
Signature of manufacturer:
Information about signatory: Hans-Dieter Ptak, Managing Director