Depstech DS500 - Frequently Asked Questions (FAQ); Connecting to Computer for File Transfer; Using Endoscope While Charging; Troubleshooting No Image or Signal

FAQ
Q1: Can | connect the computer with the endoscope for files checking
purpose?
A1 Definitely yes, but you've to insert the TF card into the TF card
slot first. After finishing the connection between the endoscope
and your PC/ Laptop (Via the USB-A 1o Type-C cable which was.
enclosed in the package), walt for few second and the device will
get into “Card Reader Mode" automatically. You can check the
files in your PC/ Laptop once you've entered this mode.
Q2: Can it be used for inspection when charging? Will it work
normally?
A2: Yes, it can be used. But be aware do not frequently used itin such
situation, which may do damage to battery lifespan. Besides, if
there s no operation happened per 15s during the charging
process, the screen backlight and the button light wil tur off
and get into "Power Saving Mode", but you can wake up the
backlight simply by pressing any butten.
Note: 1).The endoscope will b activeted nce the connaction t the power adapter
finished, t faten the charging process, lease walt il he endoscope getInto
“Power Saving Mode" and leave It lone.
2). You couldnt shut down the endoscope by holding the power button If
Youre using it forinspection during charging process.
Q3:1 can't get the image of the camera, or it keeps showing no signal
on the screen.
A3: Please make sure the camera probe was connected correctly to
the 57 screen display before open it Plus, if the camera part fell
apart from the display accidentally, you can try to reconnect it
‘and wait for a few seconds. Ifi's still showing no signal, you can
shut down the device and opened it again. Or tum to reset
function for the fastest response.