Need help?Do you have a question about the Depstech DS500 and is the answer not in the manual?
Hold the power button for 3 seconds to turn the endoscope on or off.
Start video recording or take a photo; end recording with a single press.
Use '+' to brighten LEDs or move cursor down; use '-' to dim LEDs or move cursor up.
Rotate the real-time image 180° or switch between main and side cameras.
Confirm menu choices with OK/Play button; hold to enter/close the album.
Press the Menu button to access more settings.
Understanding the working status and charging status LED indicators.
Aluminum alloy interface for probe connection and Type-C port for charging.
Supports up to 32G TF card; format card upon first usage.
Use reset button to reboot; use fill light button to control external LEDs.
Insert TF card, connect via USB-A to Type-C cable to enter 'Card Reader Mode'.
Usable during charging, but frequent use may affect battery life. Enters 'Power Saving Mode' when idle.
Ensure probe is connected correctly. Reconnect device or use reset function if signal is lost.
General| Brand | Depstech |
|---|---|
| Model | DS500 |
| Category | Analytical Instruments |
| Language | English |
To Next Page
