Need help?Do you have a question about the Depstech WF070 and is the answer not in the manual?
Controls the endoscope's power status.
Adjusts the brightness of the camera LEDs.
Displays the status of the WiFi connection.
Indicates the power system's operational status and battery level.
Resets the device to factory settings.
Port for charging the device via USB.
Instructions for powering on the endoscope.
Steps to connect the device to WiFi.
Connecting the device to the application after WiFi setup.
Overview of the application's features and buttons.
How to modify WiFi name, password, and resolution.
Instructions for charging the device using a USB adapter.
Guidance on installing accessories for the camera.
Details on model, diameter, sensor, resolution, and more.
Common questions about connecting the endoscope to the app.
Troubleshooting steps when the screen is black or no image is received.
Resolving problems when WiFi signal is found but connection fails.
Solutions for issues like flickering, freezing, or disconnection.
Important safety warnings and usage guidelines.
Recommendations for cleaning, storage, and battery life.
Information regarding WEEE and battery disposal.
Device compliance with FCC rules and radiation exposure limits.
Compliance with European standards (EMC, RoHS).
Guidelines for product and battery disposal in the EU.
General| Model | WF070 |
|---|---|
| Category | Endoscope |
| Field of View | 70 degrees |
| Waterproof Rating | IP67 |
| Resolution | 1920x1080 pixels |
| Connectivity | Wi-Fi |
| Image Sensor | CMOS |
| Light Source | 6 Adjustable LEDs |
| Compatibility | iOS & Android |
| Software | DEPSTECH App |
To Next Page
