03
Step 2- Power on
Hold this button for 2s to power on the endoscope.
Step 3- WiFi Connection
A. Turn to the WiFi setting on your smart devices (Android / iOS
phone), search for the factory setting WiFi SSID:
DEPSTECH_******
B. Then choose and fill the factory setting WiFi password:
12345678
Note: Once the power system standby, the red LED indicator will stay on.
When the blue LED indicator flashed, means the WiFi module is ready to
paired.
Note: “******” will be a series of random numbers& letters, and it may
take several seconds to wait for the WiFi signal and the wifi connection.
Please be patient for the process.
To Next Page
Loading...
