To Next PageTo Next Page
Need help?Do you have a question about the DERRICK EX and is the answer not in the manual?
Tool kits containing necessary equipment for removing and installing motor bolts.
Critical safety warnings and procedures for motor removal and installation.
Guidance on safely lifting and positioning the vibrator motor during removal and installation.
Details on selecting and installing correct mounting hardware for EX and SGX vibrator motors.
Step-by-step instructions for positioning and mounting vibrator motors onto the screen frame.
Important safety precautions for performing electrical connections on vibrator motors.
Procedures for connecting motor power cords via terminal blocks or power connectors.
Steps for connecting motor leads to the terminal block inside the junction box.
Steps for connecting motor leads using a power connector in the junction box.
List of bearings and associated components required for motor bearing replacement.
Recommended tool list for performing the bearing replacement procedure.
Requirements for the work area to ensure proper bearing replacement.
Critical safety warnings specific to the bearing replacement procedure.
Step-by-step procedure for removing bearings from the vibrator motor.
Step-by-step procedure for installing new bearings onto the vibrator motor.
General