47
7.3.4. ADJUSTING DIRECTION OF LOCKING ACCORDING TO DOOR’S OPENING WAY
- Wake the keypad up by putting your palm to the touch keys and then touch “M” button. “A” appears on the display.
- Enter 5 digit master password. After display animation, touch “1” button. “r” or “L” will be displayed.
- Touch “LOCK" button to toggle between;
“r” - right door,
“L” - left door.
- When desired way is displayed, touch “M" button.
In this way, motorized cylinder’s direction of locking will be set. Schematic representation of changing direction of locking
from right to left is as follows:
NOTE: To transfer settings to motorized cylinder, you need to lock or unlock motorized cylinder via master controller.
DESi
12345
1
To Next Page
Loading...