52
7.3.9. AUTOMATIC LOCKING
Your device has an automatic locking feature which locks itself 1 minute after it is unlocked. If you enable this feature, you
will be sure that your door is always locked. You can enable or disable this feature by following steps below:
- Wake the keypad up by putting your palm to the touch keys and then touch “M” button. “A” appears on the display.
- Enter 5 digit master password. After display animation, touch “5” button. “o” or “C” will be displayed.
- Touch “LOCK" button to toggle between;
“O” - Automatic Locking is enabled,
“C” - Automatic Locking is disabled.
- When desired way is displayed, touch “M" button.
After first locking or unlocking operation done by keypad, selected settings will be applied to the system. Schematic
representation of operation is as follows:
DESi
12345
5
To Next Page
Loading...