DESi utopicR - Enter Master Password

43
7.3. ADMINISTRATION ACTIONS / SETTINGS
Two different 5 digit passwords may be defined to the keypad; 1 master, 1 user. Both of the passwords can be use to unlock
and open. For setting up device, the master password will be needed.
7.3.1. DEFINING / CHANGING USER PASSWORD
By default, there is no user password defined in your keypad.
- Wake the keypad up by putting your palm to the touch keys and then touch “M” button. “A” appears on the display.
- Enter 5 digit master password. After display animation, touch “M” button again. “b” appears on the display.
- Touch “2" button and enter the new user password in 5 digit. After display animation, re-enter the new user password.
In this way, the user password will be defined / changed. Schematic representation of this operation is as follows:
DESi
ENTER NEW
USER
PASSWORD
2
RE-ENTER
PASSWORD
ENTER
MASTER
PASSWORD