Detex AO19 - User Manual

INSTALLATION GUIDE FOR
AO19 LOW ENERGY AUTOMATIC DOOR OPERATOR CONTROL MODULE
B1000S – SUPER SWING
User Manual
Date: July 3, 2008
P/N 103188
Note:
This product is a low energy automatic door operator and must be installed /
serviced by a qualified person . The service technician must
be familiar with the
latest ANSI /BHMA A156.10/19 standards .
NEVER sacrifice the safe operation of the automatic door for an incomplete
solution. Call the factory for technical support .
1

Summary

Installation Guide for AO19 Low Energy Automatic Door Operator Control Module

Module Description and Connector Pinouts

ISP; Synchronization Connector J1

Details the ISP/Synchronization connector for dual door operators.

Signal and Sensor Power Connector P2

Power Source 120 VAC Input Connector J3

Defines the wiring for the 120VAC power input.

Motor Connector J4

Option Switches Configuration

Describes the function of various option switches for operator behavior.

Setup Procedure

Installation Check Steps

Outlines the initial checks before module adjustment.

Module Adjustment Guide

Explains how to adjust trimmers and set initial configurations.

Basic and Advanced Adjustments

Basic Operator Adjustments

Details the steps for adjusting speed and force parameters.

Safety and Push & Go Adjustments

Covers safety speed setup and Push & Go timer adjustments.

Specific Feature Adjustments

Power Close, Door Seal, and Reverse Options

Explains configuration for power close, door seal, and obstruction reversal.

Delayed Activation Timer Setup

Describes setting up the delayed activation for door sequencing.

Point-to-Point Wiring Diagram

Dual Door Operator Synchronization

Master and Slave Controller Setup

Guides setup for dual door operation using sync cable.

Electric Lock Configuration for Twin Doors

Details wiring electric locks for independent or shared control.

Detex AO19 Specifications

General

Model	AO19
Mounting	Surface Mount
Warranty	1 Year Limited
Power Source	9V Battery
Door Type	Wood, Metal
Compliance	UL
Housing Material	Metal
Door Thickness	1-3/4" (44mm) standard