EasyManua.ls Logo

Dettson SUPREME - User Manual

Default Icon
30 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Imprimé au Canada
Imprimé sur papier 100% recyclé
Attention : Ne pas altérer votre
unité ou ses contrôles.
Appeler un technicien qualifié.
Modèles :
FEM10-M2301CM-B
FEM15-M2301CM-B
FEM18-M2301CM-B
FEM20-M2301CM-B
FEM23-M2301CM-B
FEM20-M2301DM-B
FEM23-M2301DM-B
FEM27-M2301DM-B
2011-02-04
X40163 Rev. D
Fabriqué par :
Industries Dettson inc.
3400, boulevard Industriel
Sherbrooke, Québec - Canada
J1L 1V8
D
N
S
-
0
9
8
1
R
e
v
.
A
MULTI - POSITION
INSTALLATEUR / TECHNICIEN :
UTILISER LES RENSEIGNEMENTS DANS CE MANUEL POUR
L’INSTALLATION ET L’ENTRETIEN DE L’APPAREIL ET GARDER LE
DOCUMENT PRÈS DE L’UNITÉ POUR RÉFÉRENCES ULTÉRIEURES.
PROPRIÉTAIRE :
S.V.P. GARDEZ CE MANUEL PRÈS DE L’UNITÉ POUR RÉFÉRENCES
ULTÉRIEURES.
ALIMENTATION 240 VAC POWER SUPPLY
Question and Answer IconNeed help?

Do you have a question about the Dettson SUPREME and is the answer not in the manual?

Summary

1 Safety Regulations

1.1 Safety Labeling and Warning Signs

Explains the meaning of DANGER, WARNING, and CAUTION labels used in the manual.

1.2 Important Information

Highlights homeowner responsibilities and critical precautions, like not using water-damaged units.

1.3 Danger of Freezing

Provides precautions to prevent pipe freezing and water damage during cold weather shutdowns.

2 Installation

2.1 Positioning the Furnace

Instructions on furnace placement, including level positioning and clearance requirements.

2.2 Clearances to Combustible Material

Details required clearances from combustible materials for the heating unit and supply air ducts.

2.3 Configurations

Describes the furnace's multi-position capability (upflow, downflow, horizontal) and required adjustments.

2.4 Electrical System

Explains the 240V power supply, wiring, grounding, and wire type requirements.

2.5 Installation of the Thermostat

Guidance on thermostat installation, location, wiring, and heat anticipator adjustment.

2.5.2 Ducts and Filters

Instructions on sizing ducts, insulating, using flexible connectors, and installing filters.

2.6 Supply Air Adjustments

How to adjust blower speed for heating and cooling modes based on airflow and static pressure.

2.7 Installation of Accessories

Safety warning and general guidance for installing accessories like humidifiers and air cleaners.

2.7.1 Humidifier and Electronic Air Cleaner

Details on connecting 120VAC accessories, transformers, and relays.

2.7.2 Use of a Heat Pump

Guidance on using heat pumps with the furnace and preventing simultaneous operation.

3 Operation

3.1 Start-Up

Pre-start checklist and procedure for turning on the furnace.

3.2 Operating Sequence

Explains the sequence of operations for heating and cooling modes.

3.3 Use of Manual Furnace Controls

Describes the function of manual controls like pilot light, HI/LO switch, and circuit breaker.

3.4 Airflow Verification

Steps and formulas for verifying airflow, including temperature rise and high limit tests.

4 Maintenance

4.1 Air Filter

Recommendation for replacing the disposable air filter twice a year.

4.2 Motor Lubrication

States that the blower motor is permanently lubricated and requires no additional lubrication.

5 Information

Components and Replacement Parts

Parts List

Dettson SUPREME Specifications

General IconGeneral
Heat ExchangerStainless Steel
Blower MotorVariable Speed
Fuel TypeGas
Heating Capacity40, 000 - 120, 000 BTU/h
Warranty10-Year Limited

Related product manuals