Deutz TCD 2013 2V - Page 27

4
© 02/2010 OBJ_DOKU-21741-001.fm
6/18
Technical data
TCD 2013 2VTesting and setting data
P02 73 Piston, diameter, standard Measuring point 3 = height 97 mm TCD 2013 2V 107,660 mm
P02 75 Piston protrusion 1 hole, cylinder head gasket, 1.42 mm TCD 2013 2V 0,28 - < 0,54 mm
P02 76 Piston protrusion 2 hole, cylinder head gasket, 1.52 mm TCD 2013 2V 0,54 - < 0,64 mm
P02 77 Piston protrusion 3 hole, cylinder head gasket, 1.62 mm TCD 2013 2V 0,64 - 0,75 mm
P02 78 Piston bolt, bore TCD 2013 2V 42 mm
Piston rings
P02 84 Joint clearance, piston ring 1
Identification (TOP) in direction of
combustion chamber
TCD 2013 2V 0,3 - 0,55 mm
P02 85 Joint clearance, piston ring 2
Identification (TOP) in direction of
combustion chamber
TCD 2013 2V 1,5 - 2,0 mm
P02 86 Joint clearance, piston ring 3
Identification (TOP) in direction of
combustion chamber
TCD 2013 2V 0,3 - 0,6 mm
P02 87
Axial clearance, 1st ring (double-sided keystone
ring)
Wear limit TCD 2013 2V
Measure with trapezo-
idal groove wear
gauge
-
P02 88 Axial clearance, 2nd ring (taper-faced ring) TCD 2013 2V 0,09 - 0,13 mm
P02 89
Axial clearance, 3rd ring , (bevelland-edge oil
control ring)
TCD 2013 2V 0,03 - 0,075 mm
Crankcase
Cylinder liners
P03 31 Cylinder bore, inside diameter Standard TCD 2013 2V 108 mm
P03 35
Fit depth of collar rest and sealing surface for cy-
linder liner
TCD 2013 2V 8,92 mm
P03 36 Cylinder liners, collar height TCD 2013 2V 9 mm
P03 39 Cylinder liner, overhang TCD 2013 2V
max. 0.080 mm
at least 0.030 mm
ID no. Name Information Series Value Unit
+0,017
+0,01
+0,02
+0,03
-0,02