4
© 02/2010 OBJ_DOKU-21741-001.fm
8/18
Technical data
TCD 2013 2VTesting and setting data
T01 63
Setting of valve and control piston clearance
4-cylinder
ignition sequence: 1 - 3 - 4 - 2
T01 63
Setting valve and control piston clearance
6-cylinder
ignition sequence: 1 - 5 - 3 - 6 - 2 - 4
Valves Cylinder
overlap 1 3 4 2
Set to 4 2 1 3
Valve overlap: Outlet valve is not yet
closed, inlet valve begins opening.
The inlet valve opens briefly by 2 mm when
the oulet valve is fully open. This is not the
valve overlap!
Valves Cylinder
overlap 153624
Set to 6 2 4 1 5 3
Valve overlap: Outlet valve is not yet
closed, inlet valve begins to open.
When the inlet valve is fully open, the out-
let valve opens briefly by about 2 mm. This
is not the valve overlap!
To Next Page
