Deutz TCD 2013 2V - Page 39

4
© 02/2010 OBJ_DOKU-21741-001.fm
18/18
Technical data
TCD 2013 2VTightening specifications
A13 065 Cable connection on heater flange Hexagonal, pole screw locked TCD 2013 2V 20 Nm
A49 001
Connection piece on cylinder head, clamping
shoe
TCD 2013 2V 25 Nm
ID no. Name Screw type Notes / Remarks Series
Pre-tensio-
ning value
Post-
clamping
value
For the tightening procedure according to torque using a torque wrench, a maximum variation of the
tightening torque of +/- 10% is permissible.