Deutz TCD 2013 2V - Page 413

© 02/2010 OBJ_DOKU-21813-001.fm
2/2
6
Electrical equipment
TCD 2013 2VW 48-03-01
Installing the pressure/temperature sensor
● Mount new O-ring (1).
● Lightly coat O-ring with fitting compound.
1
© 43271-0
● Insert pressure/temperature sensor.
● Plug in the cable plug (1) and snap in lock.
Ensure that the connection is perfect.
1
© 44435-0
● Mount cover (2).
● Tighten screw (1).
 4,5 Nm
1
2
© 44433-0