Deutz TCD 2013 2V - Page 58

© 02/2010 OBJ_DOKU-21745-001.fm
1/6
6
Front cover
TCD 2013 2V W 01-02-01
Renewing the crankshaft sealing ring
(opposite side to flywheel)
Standard tools:
– Pricker 8198
– Assembly lever 9017
Special tools:
– Assembly tool 142820
– Self-tapping screw
– Washer
– W 05-01-01
Removing the crankshaft sealing ring
● Remove the V-belt, V-belt pulley.
 W 05-01-01
● Make a hole of approximately 3 mm in the crankshaft
sealing ring with a pricker.
Attention!
Do not damage the front cover or cranks
-
haft.
© 44198-0
● Turn in a self-tapping screw with washer.
1
© 44199-0