Deutz TCD 2013 2V - Page 60

© 02/2010 OBJ_DOKU-21745-001.fm
3/6
6
Front cover
TCD 2013 2V W 01-02-01
● Mount guide sleeve (1).
Make sure the clamping bushing (2) is in
line with the bore (3).
3
2
1
© 44203-0
● Tighten screws (1).
1
© 44204-0
● Oil the sealing lip of the crankshaft sealing ring light
-
ly.
● Push the crankshaft sealing ring carefully onto the
guide sleeve.
Use new crankshaft sealing ring.
The sealing lip faces the crankcase.
© 44205-0