To Next Page
I
isaacbrownJul 27, 2025
Why are there streaks in my Develop ineo 163 copies?
- Kkayla00Jul 27, 2025
Streaks or dark specks in your Develop All in One Printer copies might be due to a dirty original glass. Try wiping the glass with a soft, dry cloth. Another cause might be a dirty document pad, which you can clean with a soft cloth dampened with a mild detergent. If you're copying a document printed on translucent material, place a blank sheet of paper on top of it. For thin, double-sided documents, the information on the back side may appear, so try selecting a lighter density setting by pressing the [Density] key. Also, the PC drum unit may have reached the end of its service life.
General
