PLEASE NOTICE
Standard paper weight for systems is 80 g/m
2
for monochrome machines and 90 g/m
2
for full colour ones. Since using these standards
result in optimum system performance, all specifications on performance, reliability, maintenance and replacement based on those
standard papers. Using thick papers, labels, transfer and polyester films continuously can increase the wear and tear on replacement
parts and consumables – meaning your servicing costs will go up.
Use the bypass or the lower tray from the paper feed unit when working with materials having such characteristics as polyester films,
textile transfer films and labels. Otherwise, you may be faced with double feeding or a higher number of feeding jams.
If possible use subtray when working with materials having such characteristics as polyester films, textile transfer films and labels.
Roller-marks on the copy or print may appear or increased jams can occur. Standard paper weights yield the best possible copy and
print results. Using higher grammage may influence the quality of the output. Using standard paper weights also guarantees that double
sided copies and prints are made reliably. Different characters of films as well as thick, thin and coated papers may increase the jam rate
for double sided copies and prints.
To Next Page
Loading...
