Always check if you have all necessary
parts and tools before travelling to the installation site.
• power drill + segments for drill bits
• drill bits: appropriate for oor (eg. concrete, hardwood, tiles)
• crosshead bit for power drill type
• drill 4 appropriate for the staircase steps 4mm
• grinder with steel grinding disc
• small ratchet (stubby + DR) 1/4 + small (50mm) and large extension (100mm)
• inbus cap 5 and 6 for small and large ratchet
• torx bit T30 for small and large ratchet
• wrench 13
• cap 13
• rubber hammer
• flat screwdriver SL4x80 + 0,4x2.0
• crosshead screwdriver PH2x38 + PH1x80
• torque wrench
• wire stripper
• wire cutter
• stanley knife
• small rubber hammer with a handle of 20mm
• spirit level
• aluminium saw
• steel saw
• file
• vacuum cleaner
• angle measure tool
• steel hammer
• concrete drill (when needed)
• extension cord
• grease
7
Installation tools
To Next Page
Loading...
