DeVi-Stairlifts UP - Installing the Rail

The rail is built up from the different segments. The following steps explain
how to connect the different segments and mount the rail to the stairs.
Connecting different segments
1. Start by sawing the straight parts to the desired
length as measured before ordering the stairlift.
Deburrs the rail after cutting.
2. When you need an longer straight rail then 1.85 meters
you have to connect two parts togheter by using the rail joint. (AB020000)
See figure 2 and 3. You need two connectors, eight bolts M8x16 DIN 934,
eight nuts M8 ISO 4017 and four pins.
3. Take the straight parts and attach a rail curve segment to either end of it,
except for the beginning and the end of the rail. These straight parts get a turn
segment at only one of their ends. The straight and turn segments are connected
by four DIN 7500-1 M6X20 bolts (AB030000) at the location of the four blue
arrows. See figure 4 for this step. Note: make sure that the orientation of the
curve segments is correct to get the right alignment of the parts.
10
(fig. 2) (fig. 3)
(fig. 4)
install-drawing-1-f12bd63ad3
Item Name Size Description
R1 Rail 216mm AB010000(l=216)
B1 Bend 40° AB070000(8x) + AB030000
R2 Rail 584mm AB010000(l=584)
B2 Bend 40° AB070000(8x) + AB030000
R3 Rail 366mm AB010000(l=366)
B3 Bend 75° AB070000(15x) + AB030000
R4 Rail 25mm AB010000(l=25)
B4 Bend 90° AB070000(18x) + AB030000
R5 Rail 264mm AB010000(l=264)
B5 Bend 50° AB070000(10x) + AB030000
R6 Rail 490mm AB010000(l=490)
B6 Bend 15° AB070000(3x) + AB030000
R7 Rail 2708mm AB010000(l=1850 + l=858) + AB020000
B7 Bend 35° AB070000(7x) + AB030000
R8 Rail 1163mm AB010000(l=1163)
S1 Support 0mm AB040000
S2 Support 383mm AB040000 + AB050000 + AB060000(3x)
S3 Support 144mm AB040000 + AB060000
S4 Support 293mm AB040000 + AB050000 + AB060000(2x)
S5 Support 127mm AB040000 + AB060000
S6 Support 286mm AB040000 + AB050000 + AB060000(2x)
S7 Support 0mm AB040000
S8 Support 218mm AB040000 + AB060000(2x)
S9 Support 166mm AB040000 + AB050000 + AB060000
S10 Support 114mm AB040000 + AB060000
S11 Support 80mm AB040000 + AB060000
S12 Support 0mm AB040000
S13 Support 0mm AB040000
X Rack 7400mm AB000600(l=1850mm 4x)
X Charging cable 12000mm AB080000(l=6000mm 2x)
Page 3 of 4
Installing the rail