DEVI Devilink FT User Manual

DEVIlink™ FT
5Installation Guide
1. Comfort heating: Constant temperature on the floor
in bathrooms and other rooms where a comfortable
warm surface is required. Install the Floor sensor and
choose Floor regulation for the room when doing the
configuration.
2. Total heating: Control of room temperature in living
rooms etc. Install the floor sensor and a DEVIlink™
RS. Choose Combined regulation when doing the
configuration on the DEVIlink™ CC.
3. No floor sensor: A floor sensor is not present, and
cannot be installed. You must install a DEVIlink™ RS.
Choose Room regulation.
Be aware that temperature control is less accurate without
the floor sensor and that all DEVIlink™ FTs in a room need to
havethe same sensor configuration.
DEVI recommends always installing a floor sensor.
Do not install floor heating system without a floor sensor
when the heating element is installed on or beneath wooden
surfaces and other surfaces sensitive to temperature!

DEVI Devilink FT Specifications

General

Brand	DEVI
Model	Devilink FT
Category	Thermostat
Language	English