DEVI Devilink FT User Manual

DEVIlink™ FT
7Installation Guide
3�1 Configuration
See Step-by-Step guide in DEVIlink™ CC instruction manual.
Green LED ON Standby
Red LED ON Heating
Green LED fast flash Inclusion or link test
Red LED short flash Inclusion not OK, goes to not
included.
Linktest not OK, goes to
missing link
RED LED slow flash Sensor failure
4 Factory reset a DEVIlink™ FT
Turn off power on the safety switch on the front. Hold the
install button in while pushing ON the safety switch and
keep the install button pressed until the LED gives a red
flash (approx. 5 sec.)
5 Technical specifications
Operation voltage 180-250 VAC, 50/60 Hz
Standby power
consumption
Max. 1 W

DEVI Devilink FT Specifications

General

Brand	DEVI
Model	Devilink FT
Category	Thermostat
Language	English