Please be aware of the following:
▪
The floor temperature is measured where the sensor
is placed.
▪
The temperature of the bottom of a wooden floor
can be up to 10 degrees higher than the top.
▪
Floor manufactures often specify the max tempera-
ture on the top surface of the floor (usually 27-28˚C).
▪
By default, the maximum floor temperature is set to
35°C.
▪
Always use a floor sensor or a room + floor sensor
combination to control floor heating. Without a floor
sensor, the temperature control may be less accurate
and you risk overheating the floor.
DEVIreg™ 132
Installation Guide 11
To Next Page
Loading...
