4. Set the maximum floor temperature between 20˚ and
50˚C by using a thin screwdriver on the black elec-
tronic component with temperature indications in the
upper right corner.
5. Install the front cover and button in the reverse order
of disassembly.
6. Turn on the power supply.
3 Settings
How to change the minimum and maximum floor tem-
peratures
1. Lift off the adjustment
button using a thin
screwdriver. (1)
2.
Move the pins to the
desired positions. (2
and 3)
3. Put the adjustment
button back in place.
DEVIreg™ 132
10 Installation Guide
To Next Page
Loading...
