DEVI Devireg 330 Installation And Use Instructions

AUS Installation and Use Instructions
the devireg
TM
330
16 Amp. Thermostat
PLEASE NOTE
The enclosed Floor Sensor MUST be installed so that it
may be REMOVED for service if required!
The sensor probe should be installed into a conduit with
no more than one wide-angle bend. This should be
installed from the floor to the thermostat or junction box
located directly above the heated area.
PLEASE READ ENCLOSED INSTRUCTIONS

DEVI Devireg 330 Specifications

General

Brand	DEVI
Model	Devireg 330
Category	Thermostat
Language	English