▪
Floor manufactures often specify the max temperature
on the top surface of the floor (usually 27-28˚C).
▪
Always use a floor sensor to control floor heating.
Without a floor sensor, the temperature control may
be less accurate and you risk overheating the floor.
Thermal
resist-
ance
[m
2
K/W]
Examples of floor-
ing
Details Approximate
setting for 25˚C
on top surface
of floor
0.05 8 mm HDF based
laminate
> 800
kg/m
3
28˚C
0.10 14 mm beech par-
quet
650 - 800
kg/m
3
31˚C
0.13 22 mm solid oak
plank
> 800
kg/m
3
32˚C
< 0.17 Max. carpet thick-
ness suitable for
floor heating
acc. to
EN/IEC
1307
34˚C
0.18 22 mm solid fir
planks
450 - 650
kg/m
3
35°C
DEVIreg™ 530
Installation Guide 11
To Next Page
Loading...
