What to do if my DEVI devireg 531 has no heat?
If your DEVI Thermostat isn't producing heat, start by checking the main fuse, the residual current device (RCD), and other safety devices. If those are fine, ensure all cables connected to the thermostat are properly installed. As a last resort, consider replacing the thermostat or the NTC sensor.
Why is my DEVI devireg 531 Thermostat always on?
If your DEVI Thermostat is providing constant heat, it could be due to a relay being constantly on or a floor sensor interrupt. Try replacing the thermostat or replacing the NTC sensor.
General| Temperature range | +5°C to +45°C |
|---|---|
| Voltage | 230V AC |
| IP Class | IP20 |
| Ambient temperature | -10°C to +30°C |
| Protection class | Class II |
| Type | Electronic thermostat |
| Power supply | 230V AC |
| Control | On/Off |
| Installation | Wall-mounted |
| Mounting | Wall mounting |
| Dimensions | 85 x 85 x 36 mm |
To Next Page
