DEVI devireg 532 - Maximum Floor Temperature Setting

4
Maximum oor limiter is preset at the factory to 35°C
for cable temperature safety.
All product approvals must be observed when
changing the maximum preset limiter.
You can reset the oor limiter on the Devireg™ 532
by taking o the front cover and with
a screwdriver adjust the sunken temperature dial
in the top le hand corner.
For wooden oor constructions DEVI™ recommend
the temperature is limited to a maximum of 30°C.
Maximum limiter setting for dierent oor
constructions:
Tiles on timber 30°C
Carpet/vinyl on timber 35°C
Wooden oors (parquet, plank, etc.) 27°C
Tiles on concrete or screed 35°C
2. Maximum oor temperature setting