How to troubleshoot a deviceSTYLE Brunopasso PD-1 Coffee Maker with no power?
If your deviceSTYLE Coffee Maker isn't powering on, the most likely cause is a disconnected power cord. Ensure the power cord is securely connected to both the coffee maker and the power outlet.
What to do if no espresso comes out of my deviceSTYLE Brunopasso PD-1 Coffee Maker?
If no espresso comes out of your deviceSTYLE Coffee Maker, there could be a couple of reasons. First, check if the water tank is empty and refill it if necessary. Second, make sure you've inserted a coffee pod into the machine.
Why is the milk not foaming well in my deviceSTYLE Brunopasso PD-1 Coffee Maker?
If the milk is not foaming sufficiently in your deviceSTYLE Coffee Maker, consider these potential causes: the steam nozzle may be clogged (in that case you should contact your dealer or near service center), there might not be enough water in the water tank (refill it), the milk might not be cold or fresh enough (use colder, fresher milk), too many appliances might be connected to the outlet (connect the product to a wall outlet), or you might be using low-fat milk (use milk with a fat content of 3.6 % or more).
What causes water to leak from the bottom of my deviceSTYLE Brunopasso PD-1?
If water leaks from the bottom of your deviceSTYLE Coffee Maker, it's likely that the water tray is full. Empty the water tray to resolve this issue.
Why is the espresso from my deviceSTYLE Coffee Maker not hot enough?
If the extracted espresso from your deviceSTYLE Coffee Maker isn't hot enough, it could be because too many appliances are connected to the outlet; connect the product to a wall outlet. Also, espresso should be drunk when its temperature is 65 to 80 ºC. A milk temperature of 63 to 67 ºC is suitable.
Why is there no steam coming from the steam nozzle of my deviceSTYLE Brunopasso PD-1 Coffee Maker?
If no steam comes from the steam nozzle of your deviceSTYLE Coffee Maker, it could be due to insufficient water in the water tank (refill the water tank) or the steam nozzle is clogged (in that case you should contact your dealer or near service center).
Why does espresso seep from the pod holder of my deviceSTYLE Brunopasso PD-1?
If espresso seeps from the pod holder of your deviceSTYLE Coffee Maker, it could be because the height of the pod holder is low (the handle is loose) - adjust the height of the pod holder (page 11). Alternatively, the pod filter of the pod tray set might be dirty, so try cleaning the filter.
What to do if the pump is silent and no espresso comes out of my deviceSTYLE Brunopasso PD-1 Coffee Maker?
If the pump cannot be heard and no espresso comes out of your deviceSTYLE Coffee Maker, the internal fuse may be blown. Please contact your dealer or near service center.
Why does my deviceSTYLE Brunopasso PD-1 Coffee Maker continue dripping after extraction?
Dripping after extraction from your deviceSTYLE Coffee Maker is normal, caused by dripping of coffee in the pod holder.
Is it normal for the body of my deviceSTYLE Brunopasso PD-1 Coffee Maker to get hot?
The body of your deviceSTYLE Coffee Maker becomes hot because it radiates the heat of the internal boiler, but this is normal.
General| Product Name | deviceSTYLE Brunopasso PD-1 |
|---|---|
| Category | Coffee Maker |
| Type | Espresso Machine |
| Capacity | 1 cup |
| Pressure | 15 bar |
| Material | Stainless Steel |
To Next Page