Why are there paint bubbles in the cup of my DeVilbiss Paint Sprayer?
Paint bubbles in the cup of your DeVilbiss Paint Sprayer are often caused by a fluid nozzle that is not tight. Tighten the fluid nozzle to 9–11 nm (6-8 ft-lbs).
Why is fluid leaking from the packing nut of my DeVilbiss Paint Sprayer?
Fluid leaking from the packing nut of your DeVilbiss Paint Sprayer is usually caused by a worn packing or fluid needle. Replace the worn parts.
General| Fluid Tip Material | Stainless Steel |
|---|---|
| Type | HVLP |
| Air Inlet Thread | 1/4" NPT |
| Nozzle Size | 2.2 mm |
| Maximum Fluid Delivery | 10.0 fl. oz./min |
| Air Inlet | 1/4" NPT |
| Maximum Air Pressure | 30 PSI |
| Material | Aluminum |
Warnings about flammable materials, combustible coatings, and static electricity risks.
Recommendations for respiratory, eye, and hand protection during spraying.
Guidance on avoiding improper operation, maintenance, and incorrect parts.
Steps for servicing the air valve, including cleaning, checks, and leak identification.
Detailed instructions for removing and replacing the air valve assembly and its seals.
Step-by-step guide for replacing the needle packing and related components.
Instructions for replacing the spreader valve assembly and its internal seal.
To Next Page