DeVilbiss AG360 Series - Product Description; EU Declaration of Conformity

EN
Product Description:
Machinery Directive 2006/42/EC
ATEX Directive 94/9/EC
Finishing Brands UK,
Ringwood Road,
Bournemouth, BH11 9LH. UK
Protection Level: II 2 G X T6
N/A
Sound Pressure Level:
Suitable for use in hazardous area: Zone 1 & 2
Vibration Level:
We: Finishing Brands UK, declare that the above product conforms with the Provisions of:
AG362
BS EN 1953:2013 Atomising and spraying equipment for coating materials - Safety requirements
by complying with the following statutory documents and harmonised standards:
D Smith (General Manager)
Solvent and water based materials
EU Declaration of Conformity
EN 14462:2005+A1:2009 Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling
equipiment - Accuracy grades 2 and 3
30/01/15
HVLP and Trans-Tech products comply with the requirements of PG6 from the EPA guidelines and offer greater than 65% transfer efficiency.
EN ISO 11201:1995 Acoustics - Noise by machinery and equipment - Determination of emission sound pressure levels at a work station and
at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
EN1127-1: Explosive atmospheres - Explosion prevention - Basic concepts
EN 13463-1: Non electrical equipment for use in potentially explosive atmospheres - Basic methods and requirements
This Product is designed for use with:
Available on request
Sound Power Level: Available on request
Manufacturer:
EN ISO 12100-1:2010 Safety of Machinery - Basic concepts, general principles for design - Basic terminology, methodology
EN ISO 12100-2:2010 Safety of Machinery - Basic concepts, general principles for design - Technical principles
SB-E-2-643 R5.0
3/28