To Next PageTo Next PageHow to avoid chemical exposure with DeVilbiss Nail Gun?
To reduce your exposure to chemicals that could cause cancer or reproductive harm when using your DeVilbiss Nail Gun, ensure you work in a well-ventilated area. Always use approved safety equipment, and wear an MSHA/NIOSH-approved, properly fitting face mask or respirator.
Explains DANGER, CAUTION, and WARNING symbols for hazard identification.
Warns about dust and chemicals from construction activities and personal protective equipment.
Hazards from propelled materials and air streams causing eye or head injuries.
Risks from sparks and exceeding pressure ratings leading to fire or explosion.
Long-term noise exposure leading to permanent hearing loss.
Hazards from dust and chemical vapors harmful to the respiratory system.
Hazards from accidental activation, propelled fasteners, and improper tool use.
Hazards from loose clothing or jewelry getting caught in moving parts.
Injuries from tools designed for cutting, shearing, or punching.
Fasteners ricocheting causing injury or property damage.
Tools with moving elements getting caught in clothing or hair.
Tools designed for cutting, shearing, or punching causing injury.
Advises against storing tools in cold and using antifreeze lubricants.
Details manual lubrication steps, required oil type, and frequency.
Explains the convenience and benefits of using an oiler and filter.
Specifies using filtered, lubricated, regulated compressed air and pressure limits.
Provides instructions on hose types, connections, and maintenance.
Highlights dangers of improper trigger use and holding against surfaces.
Step-by-step guide on how to use the contact trip mechanism.
Procedure to verify the correct function of the safety mechanism.
Disconnecting air, handling tool carefully, and keeping others away.
Instructions on opening the magazine and inserting fasteners.
Ensuring proper safety equipment and lubrication.
Steps for connecting the tool to the air compressor.
Regulating air pressure for optimal fastener penetration.
Steps to remove jammed fasteners from the magazine.
Detailed procedure for clearing jams in the stapler's discharge area.
Detailed procedure for clearing jams in the brad nailer's discharge area.
Troubleshooting common causes and corrections for jammed fasteners.
Diagnosing and resolving sluggish operation or week drive.
Addressing problems like tool not starting or running slow.
Details maximum pressure, operating pressure, air inlet, capacity, and fasteners.
Details maximum pressure, operating pressure, air inlet, capacity, and fasteners.
Lists compatible fastener brands and sizes for the stapler.
Lists compatible fastener brands and sizes for the brad nailer.
Details warranty duration and what is covered for consumer use.
Instructions for processing warranty claims and required actions.
Lists conditions and circumstances that are not covered by the warranty.
General