SB-2-202-B Page 7
HAV-500 OR
HAV-501
Adjusting Valve
(HAV-501 SHOWN)
HAV-500 does not
have pressure gauge.
Use to control air
usage at gun.
GFC-501 (Acetal) 20 Oz. Cup
GFC-502 (Aluminum) 1-Liter Cup
Gravity Feed Cups
Joins any single
piece DeVilbiss air
cap with latest
version MBC-368,
MSA-1 or GTI-3
retaining rings.
Helps prevent parts
loss and provides
easier assembly.
JGA-156-K10
Spring Clips
These gravity feed cups
are designed to be used
with EXL, FLG, GFG,
GFHV or GTI gravity feed
spray guns.
ACCESSORIES
GTI-5033-2000
Air Cap Test Kit
The purpose of this test kit
is to measure air cap
atomizing air pressure at
the center air port of the air
cap. Used to confirm code
compliance and as a daily
quality control measure.
Paint Spray Respirators
40-141 (Sm) 40-128 (Med) 40-143 (Lg)
Spray Gun Lube
SSL-10-K12 (2 oz. bottle)
Industrial Quick Connects
for HVLP Guns (Air)
HC-4419
1/4" NPS(F)
HC-4699
1/4" NPT(M)
HC-1166
1/4" NPT(M)
HC-4700
1/4" NPT(F)
29-3100-K6 Scrubs
®
Hand Cleaner Towels
Scrubs
®
are a pre-
moistened hand cleaner
towel for painters, body
men and mechanics that
go where you go and no
water is needed.
WR-103 Wrench
Contains all neces-
sary tip, hose and
nut sizes used on
or with gun.
Compatible with all paint materials;
contains no silicone or petroleum
distillates to contaminate paint.
MSDS Sheet available upon request.
These brushes are
helpful in cleaning
threads and recesses
of gun body.
Cleaning Brushes
42884-214-K5 (3/8")
42884-215-K10 (5/8")
GH-505
Gun Holder
Gun holders are
made to hold stan-
dard paint cups, grav-
ity feed guns and
cups, and paint filters.
GH-407
Gun Holder
(1) Wall mount bracket
included with GH-407.
Holds standard paint cups,
gravity feed guns and
cups, and paint filters.
OMX-70-K48 Paint Cup Liner Kit
Allows quick & easy clean-up.
Consists of : 1 - Piercing Tool,
48 - Disposable Liners, 48 - Drain Bushings
NIOSH-Certified for respiratory protection in
atmospheres not immediately dangerous to life.
To Next Page
Loading...
