To Next PageTo Next Page
Need help?Do you have a question about the DeVilbiss SRi PRO Lite and is the answer not in the manual?
General| Air Inlet Thread | 1/4" Universal |
|---|---|
| Maximum Air Pressure | 30 PSI |
| Material | Anodized Aluminum |
| Type | HVLP |
| Fluid Tip Options | 1.2mm |
| Included Accessories | Spanner |
Defines maximum static air input pressure and operating pressure for HVLP setups.
Details risks associated with solvents, fire, static, and toxic vapors.
Covers inspection, misuse, modifications, lockout, noise, and pressure safety.
Recommends wearing gloves, safety glasses, and respirators during operation.
Guide for selecting air caps based on efficiency, HVLP, and spray pattern.
Warning and requirements for earthing the spray gun to prevent static discharge.
Steps for connecting air supply, mixing material, and setting air pressure.
Guidance on adjusting fluid flow, pattern size, and test spraying.
Instructions on gun positioning, distance, overlap, and shutdown.
Addresses issues like no spray, spitting, and paint build-up on the gun.
Covers paint build-up on the fluid tip and air cap, and round spray problems.
Explains causes and corrections for uneven spray patterns like heavy top/bottom or side spray.
Provides a method to differentiate between air cap and fluid tip obstructions causing pattern defects.
