DeVilbiss HVLP Gravity Feed Spraygun - Page 9

Page 9SB-2-543-F
NIOSH-Certified for respiratory protection in
atmospheres not immediately dangerous to
life.
Consists of : 1 - Piercing Tool,
48 - Disposable Liners, 48 - Drain Bushings
OMX-70-K48 Paint Cup Liner Kit
Allows quick & easy clean-up.
Cleaning Brushes
42884-214-K5 (3/8")
42884-215-K10 (5/8")
These brushes are
helpful in cleaning
threads and recesses
of gun body.
Compatible with all paint materials;
contains no silicone or petroleum
distillates to contaminate paint.
MSDS Sheet available upon request.
Contains all neces-
sary tip, hose and
nut sizes used on or
with gun.
SPN-5 Wrench
Scrubs
®
are a pre-
moistened hand cleaner
towel for painters, body
men and mechanics that
go where you go and no
water is needed.
29-3100-K6 Scrubs
®
Hand Cleaner Towels
HC-4720
1/4" NPT(F)
HC-1166
1/4" NPT(M)
HC-4719
1/4" NPT(M)
HC-4419
1/4" NPS(F)
Industrial Quick Connects
for HVLP Guns (Air)
Spray Gun Lube
SSL-10-K12 (2 oz. bottle)
Fits Compact gun only.
Compatible with DeVilbiss high
flow quick disconnects.
MPV-60-K3
Air Inlet Swivel
(Pack of 3)
Installs into gun to enable
user to control and reduce
air usage at the gun.
Replaces SP-637 plug.
SP-402-K
Air Adjusting Valve
Paint Spray Respirators
40-141 (Sm) 40-128 (Med) 40-143 (Lg)
ACCESSORIES
These gravity feed cups
are designed to be used
with EXL, FLG, GFG,
GFHV, GTI or Compact
gravity feed spray guns.
HAF-507
Whirlwind™
In-Line Air Filter
Removes water, oil,
and debris from the
air line.
GFC-501 (Acetal) 20 Oz. Cup
GFC-502 (Aluminum) 1-Liter Cup
Gravity Feed Cups
HAV-500 does not
have pressure gauge.
Use to control air
usage at gun.
HAV-500 OR
HAV-501
Adjusting Valve
(HAV-501 SHOWN)
KGP-5-K5
Paint Filter Kit (Gravity)
CUP SYSTEM
ADAPTER
DeKups Cup System & Adapter
DPC-607 Reusable Cup 9 oz – Kit of 2
DPC-606 Reusable Cup 24oz – Kit of 2
DPC-608 Reusable Cup 34 oz – Kit of 2
DPC-602 Disposable Cup 9 oz – Kit of 32
DPC-601 Disposable Cup 24 oz – Kit of 32
DPC-600 Disposable Cup 34 oz – Kit of 32
DPC-31 Adapter
Gravity cup strainers,
50 mesh, package of 5.
U.S. Patent numbers 6,820,824 and 7,374,111
owned by 3M Innovation Properties Co.
Additional U.S. Patents: Nos. 7,380,680;
7,354,074; 7,353,964; 7,350,418; 7,344,040;
7,263,893; 7,165,732; 7,086,549.