S30 Satellite Meter Manual
6
3.2 Charging
Charge the meter before the first time use. Please
charge the meter as follows:
1. Insert the charger output plug into S30 DC charge
socket.
2. Connect the charger to AC 100V-240V Power and
the charger indicator of meter is with red light.
3. When indicator switch to green, the instrument
has been fully charged(It is suggested to charge
extra one hour after indicator switched to green,
which will be helpful to extend the battery life).
Then you can disconnect the power and pull out
the charger output plug.
NOTE: Only charge in the temperature 10
℃
~35
℃
To Next Page
Loading...
Need help?
General
