Need help?Do you have a question about the Deviser DS2460Q and is the answer not in the manual?
General| Battery Life | ≥ 4 hours |
|---|---|
| Input Impedance | 50 Ω |
| Level Accuracy | ± 1.5 dB |
| BER Range | 1E-3 to 1E-9 |
| Constellation Diagram | Supported |
| Power Supply | AC 100-240V, 50/60 Hz |
| Amplitude Accuracy | ± 1.5 dB |
| Display | 7 inch TFT LCD |
| MER Range | up to 40 dB |
| Battery | Li-ion rechargeable battery |
| Weight | 3.5 kg |
| Interface | USB, HDMI |
Covers safety notices, product damage, and hazard warnings.
Details warranty policy and limitations.
Guidelines for meter calibration frequency and authorized service.
Instructions for battery care, replacement, disposal, and firmware.
Overview of the DS2460Q's features, capabilities, and design.
Details the physical appearance and ports of the meter.
Explains the function of each keypad key and input methods.
Explains the elements displayed on the meter's screen.
Performing analog/digital channel level tests, MER, and BER.
Interpreting constellation diagrams for digital QAM channels.
Measuring and analyzing Bit Error Rate statistics.
Utilizing fast and normal spectrum analysis modes.
Steps for measuring signal levels on analog and digital channels.
Measuring Carrier-to-Noise ratio with correct setup.
Measuring channel flatness and splitter gain.
Measuring power hum modulation distortion on analog channels.
Utilizing red light source for fiber optic breakpoints.
Using Time Domain Reflectometry for cable fault detection.
Creating and saving custom channel plans for measurements.
Accessing general setup, language, date/time, and network settings.
Configuring measurement units, compensation, and limits.
Building, saving, and selecting user-defined channel plans.
Details on the battery, its life, and charging procedures.
Information on the Micro USB port for PC communication.
Comprehensive list of technical specifications for the DS2460Q.
List of accessories provided with the DS2460Q meter.
To Next Page
