DS2460Q QAM Analysis Meter Operation Manual
94
4.20 PING Test
Press to return to main menu interface and
press
(OTHER) and use arrow buttons to select
the HUM icon, and then press
to enter C/N
function. As show in Figure 4-76.
Figure 4-75
If user want to start PING test, user must setup the
DS2460Q network address. As show in the Figure 4-76.
If you want to directly PING web site domain name,
you must configure the DNS server IP address. If you
don’t configure the DNS server IP address, you only
can PING IP address.