DS2460Q QAM Analysis Meter Operation Manual
139
5.5.3 Edit User Plan
The user plan is combined by following:
* Digital(numeric) channel number
* Standard (alphanumeric) channel number
* Channel type (Analog, DVB-C, DOCSIS)
* Carrier frequency
* Audio offset
* Activation status
*DVB-C Channel Standard or DOCSIS Channel
Standard
*Channel Bandwidth
* Modulation
* SR(Symbol rate)
You can set the channel number to be displayed in
digital(numeric) mode or standard (alphanumeric)
mode. After choose, the meter will show the channel
number as you desired in any measurement mode.
Refer to Figure 5-29 and Figure 5-30.