Devolo dLAN 1000 duo+ - LED Status and Encryption Button Functions

11 Introduction
devolo dLAN 1000 duo+
Flashing behaviour of the dLAN LED
* For information on improving transmission rate, refer
to Chapter 5.2 Bandwidth optimisation.
2.2.2 Network jacks
Using the two network connectors of the dLAN 1000
duo+, you can connect a computer and your television
to the dLAN 1000 duo+ using a commercially available
network cable.
2.2.3 Integrated electrical socket
To connect other network devices to your mains
supply, use the electrical socket of the dLAN 1000
duo+. The mains filter integrated into the dLAN 1000
duo+ eliminates any noise of connected devices and
significantly improves data transmission in the
network.
LED
Flashing
behaviour
Meaning
Red LED Flashes at
intervals of
0.5
sec.
(on/off)
No dLAN connec-
tion exists
Red LED Flashes at
intervals of
2
sec.
(on/off)
Data transmis-
sion rate not in
optimum range *
White
LED
Lights up
steady
An encrypted
dLAN connection
exists and the
adapter is ready
to operate
White
LED
Flashes at
intervals of
0.5
sec.
(on/off)
dLAN encryption
being established
White
LED
Flashing at
intervals of
0.5/50-60 sec.
(On/off)
Adapter is in
PowerSave mode
LED
Flashing
behaviour
Meaning